Details

---

Product details of PROCOAT Z388 Multipurpose Elastic Acrylic Based Liquid Applied Membrane
Water Proofing for Outdoor & Indoor - [Red/Blue/Green/Grey/White]

• Procoat Z388 is based on a newly developed acrylic polymers and it is dramatically reduces solar heat absorption in either air-conditioned or non-air conditioned buildings. Waterproofing of roofs on different types of sub-strates:
• Roof Tiles
• Zinc and metal
• Brick, mortar and concrete Protection of partition walls against surface water filtrations:
• Vertical side walls, pipings, etc.
• Bridging of joints and cracks When applying on PVC or polyster substrates, and on paint, it is recommended to carry out trial applications to determine the compatibility of Procoat Z388 to the substrate and whether it is necessary to carry out substrate preparation (eg. sanding, priming, etc.) prior to full scale application.
• Environmentally preferred coating: water based , non-toxic ME PHS
• Waterproof to rain and splashes
• Excellent high solar reflectivity (white colour finished)
• High elasticity
• Easy application
• Excellent hiding power Excellent UV stability
• Crack bridging ability
• Impermeable
• Good adhesion to most substrates: concrete, mortar, fibrocement, tiles, bricks, steel, zinc, aluminium, bituminousApply with a short hair wool roller, brush or by airless spray.Stir gently until the mix is homogenous and a uniform colour is achieved. Using a short-hair roller or brush apply a layer of the diluted PROCOAT Z388 After the primer has dried (>3 hours at +30 C), apply successive layers of PROCOAT Z388 to the desired film thickness. Ensure the previous layer is completely dry before applying the next layer. Coverage may vary depending upon the nature and texture of the substrate and thickness of the membrane. Clean all tools and application equipment with water immediately after use. Hardened material can only be removed mechanically

COLOUR: