Details

---

Description 

• Boskim Finish is polymer-modified cementitious filling and leveling plaster for concrete surfaces. It is used as a thin plaster to smoothen and repair minor surface imperfections.
• Boskim is a two-coat system consisting Boskim Base as a base coat and Boskim Finish as a finishing coat.
• Boskim Finish is a smooth finish coat with the exclusion of silica sand. Recommended thickness is 1mm to 2mm. With proper application, it provides a smooth finish to receive wall covering or painting.
• Boskim Finish 300 is designed for internal application. Boskim Finish 600 is designed for external applications. It is UV resistant and with water repellency properties

  

Features 

• Good filling properties
• Excellent workability
• Non-combustible
• Non-cracking
• Good adhesion to substrates

 

Performance Properties
Appearance	Powder
Colour	White
Packaging	25kg
Binder	Cement
Mixing Ratio	Approx. 10L of clean water in 25 kg powder
Fire Hazard	Does not spread/support fire
Wet Density	Approx. 1.6kg/litre
Adhesion Strength	Approx. 0.5N/mm2
Product Data Sheet (PDS).pdf

 

Recommended Uses

• Can be used on vertical, overhead, and non-traffic bearing horizontal surfaces.
• Can be applied to precast and formed concrete, regular and lightweight block, brick, stone, stucco, granite, and other concrete and masonry surfaces.
• Typical applications are bridges, parapets, parking garages, tunnels, silos, basements, and building walls.
• It may be used for above or below-grade applications. Use as an alternative for rubbing of concrete surfaces to hide defects and blemishes in architectural concrete.