Details

---

Description 

• Boskim Base is a based coat cementitious filling and levelling plaster for concrete surfaces. It is used as a thin plaster for levelling and finishing the uneven surfaces.
• Boskim Base consists of finely crushed white marble/ dolomite, cement, fine graded silica sand aggregates and Boskim aid which consist of alkali resistant additives. Recommended thickness is 2mm to 4mm.
• After application of Boskim Base, the surfaces shall be applied with Boskim Finish in order to achieve a smooth and flat finishes. Refer Boskim Finish TDS for further details.

  

Features  

• Good filling properties
• Excellent workability
• Non-combustible
• Non-cracking
• Good adhesion to substrates
• For internal and external use

 

Performance Properties
Appearance	Powder
Colour	White
Packaging	25kg
Binder	Cement
Mixing Ratio	Approx. 8L of clean water in 25 kg powder
Relative Density	1.7kg/litre (mix)
Adhesion Strength	Approx. 10kgf/cm2
Product Data Sheet (PDS).pdf

  

Recommended Uses

• Can be used on vertical, overhead and non-traffic bearing horizontal surfaces.
• Can be applied to precast and formed concrete, regular and lightweight block, brick, stone, stucco, granite, and other concrete and masonry surfaces.
• Typical applications are bridges, parapets, parking garages, tunnels, silos, basements, and building walls.
• It may be used on interior or exterior, above or below grade applications. Use as an alternative for rubbing of concrete surfaces to hide defects and blemishes in architectural concrete.