Details

---

TILE ADHESIVE CEMENT

BRAND : WEBER

WEIGHT : 25KG

COLOUR : GREY

Tile adhesive for large Porcelain tiles on wall and floor.

 

ABOUT THE PRODUCT

-Substrate must be dry, sound, flat / true & free of contaminants.

-Ceramic Tiles are to be fix dry. Do not soak in water.

-Mix weberset superflex 21 with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.

-Spread adhesive to the substrate at bed thickness of 3– 6 mm (may vary depending on tile size & thickness) with suitable notched trowel.

-Spread no more than 1 m2 at a time to avoid Skin-Over. 

-Promptly fix tiles onto adhesive bed, followed by slight twisting action to ensure good contact ie. Solid Bed Fixing.

-Touch adhesive bed periodically to check for Skin-Over. Where adhesive bed is no longer tacky / sticky, Skin-Over had occurred. Re-Trowel adhesive bed.

-Allocate joints of approx. 2 – 3 mm wide between tiles.

-Remove surplus adhesive from tile surface & joints before it hardens.

-Set for 24 hours; before grouting commences.

 

FEATURES AND BENEFITS

-Excellent bonding performance

-Low wall tile slippage

-Excellent bond strength (x>2.0N/mm2)