Details

---

• During tiling allocate minimum joints of 2mm wide for wall tiling & 3 mm wide for floor tiling.
• Allow adhesive bed to set 24 hours before grouting commences.
• Ensure that joints are dry, clean or free of contaminants.
• Mix weberfill fine grout with Clean Water (or webermix GT-mix I) as per the recommended mix ratio.
• Mechanical mixing is recommended to obtain a uniform coloured mortar. Ensure pigments are thoroughly dispersed during mixing.
• Apply grout into joints using a grout float / rubber squeegee,ensuring joints are fully compacted with grouting mortar.
• Apply to small areas at time; and clean excess or residue grout promptly using a damp cloth or sponge; before it dries out.
• When grout is sufficiently firm, polish tile surface with a clean dry cloth to remove grout film / haze.
• Allow grout to set for 24 - 48 hours.