Details

---

During tiling allocate minimum joints of 2 mm wide for wall tiling 3 mm wide for floor tiling.
Allow adhesive bed to set 24 hours before grouting commences.
Ensure that joints are dry, clean or free of contaminants. Mix weberfill F&W grout with Clean Water (or webermix GT mix I) as per the recommended mix ratio.
Mechanical mixing is recommended to obtain a uniform coloured mortar. Ensure pigments are thoroughly dispersed during mixing.
Apply grout into joints using a grout float / rubber squeegee, ensuring joints are fully compacted with grouting mortar.
Apply to small areas at time; and clean excess or residue grout promptly using a damp cloth or sponge; before it dries out. When grout is sufficiently firm, polish tile surface with a clean dry cloth to remove grout film / haze.
Allow grout to set for 24 - 48 hours.