Details

---

• Ensure that joints are dry, clean or free of contaminants.
• Mix weberfill ultra plus grout with Clean Water as per the recommended mix ratio.
• Mechanical mixing is recommended to obtain a uniform coloured mortar. Ensure pigments are thoroughly dispersed during mixing.
• Apply grout into joints using a grout float / rubber squeegee, ensuring joints are fully compacted with grouting mortar to prevent cracking.
• Apply to small areas at time; and clean excess or residue grout promptly using a damp cloth or sponge; before it dries out.
• When grout is sufficiently firm, polish tile surface with a clean dry cloth to remove grout film / haze.
• Allow grout to set for 24 - 48 hours before subjecting to normal service
  condition.