Details

---

• Remove dust, loose particles, grease and traces of foreign materials that may affect adhesion
• Dampen the dry absorbent surface before application of E.MIX Eco Base

Mixing & Installation

• Mix thoroughly with appropriate amount of water by using an electrical mixer.
• Allow mixture to stand for 10 minutes for additives to dissolve.
• stir again the mixture and ready to apply
• Apply with steel trowel or spatula
• When applying several layers, the layer underneath must be dried before spreading the subsequent layer.
• Finished surface can be sanded with fine sand-paper when necessary.
• Ceiling may be spray-textured finished