Details

---

All Purpose Joint Compound

Obaproof All Purpose OSG Multi Purpose Ready-Mixed / Non-Asbestos Joint Compound Special Vinyl formulation that require minimal mixing to thinning provides a smooth seamless finish for gypsum board wall, ceiling joints and brick wall. Obaproof All Purpose OSG used for taping, finishing gypsum board joints, filling, covering and for final touch-up coats in interior gypsum board applications. It is an ideal material for embedding fasterners,corner surfaces where necessary. It can also be used to repair crack on
brick wall surface.

Product specification:
• Pail:
25kg, 5kg
• For Joint Finishing:
25kg, Covers approx 163fr (49.55mr)
 For Texturing:
25kg, Covers approx 195fs (18.38m2)

Storage:
Store at room temperature in a cool dry location. Keep away from direct exposure to sunlight. Protect freezing. The seal to be tightly secured.

Preparation:
• Store Obaproof All Purpose OSG at room temperature for 24 hours prior to the application.
• Stir content lightly, do not add water.
• Use directly from the container when use for covering embedded fasterners, corner beads and trims.
• In necessary add 1/2 pints (250ml) of water, remix gently.
• Do not add in any other material.
• Keep container covered when not in use.

Sanding:
Sanding is not allowed. If required, use very fine sandpaper of grit 160.

Application:
1. Apply Obaproof All Purpose OSG only on dry surfaces.
2. Apply throughly and allow each coat to dry before apply the next.
3. Keep air to the min. joint compound surface temperature 26/ 30c within working area until joint are completely dry.